48 Foot Flat Bed Semi Trailer will be shipped to Mauritius

 

48 Foot Flat Bed Semi Trailer for Sale in Mauritius

 

This time, a Mauritius customer got to know our company through a friend's introduction, and learned that our company is a supplier specializing in the production of semi-trailers, so they became interested in us. Mauritius customer have left inquiries on our official website titan-vehicle, and customer have asked us for specific information about container flatbed trucks for the needs of transporting containers. Our sales quickly received Mauritius customer. After asking about the specific needs of customer, the sales staff recommended this 48 foot flat bed semi trailer to the customer. The customer was very satisfied and ordered two 48 foot flat bed semi trailers.

Now, the production of these 48 foot flat bed semi trailers has been completed and will be packaged for delivery. It is believed that they will soon be delivered to customer in Mauritius.

 

48 Foot Flat Bed Semi Trailer for Sale in Mauritius

 

 How to maintain the flat bed semi trailer after buying?

 

1. Maintenance after the new flat bed semi trailer is put into use

1) Before the new flat bed semi trailer is put into use, it should be prepared for inspection according to the requirements of "Instructions for Use", and all external bolts and nuts should be tightened once.

2) After the new flat bed semi trailer runs for 30-50 kilometers for the first time, check whether there is high heat or noise at the hub and suspension bearing. If any abnormality is found, the cause should be found in time and removed.

3) For the use and maintenance of the diesel engine and the high-pressure oil pump, please refer to the instruction manual of the accessories.

4) Within the first 300 kilometers of the new flat bed semi trailer, its parts are in the state of running-in. During this period, the weight of the trailer should not exceed 80% of the rated load, and it should not be driven on muddy roads.

5) After the new flat bed semi trailer runs for 300-500 kilometers, all bolts and nuts should be tightened once.

48 Foot Flat Bed Semi Trailer for Sale in Mauritius

 

2. Maintenance after driving 1200-2000 kilometers

1) Clean and lubricate all parts according to the lubrication diagram.

2) Check and adjust the gap between the brake tellurium disc and the brake hub of all wheels.

3) Check whether the electrical circuit is loose, damaged or poorly insulated.

4) Check whether the parts of the traction frame and the bogie are in good condition.

5) Check whether there is leakage in the brake system and hydraulic system pipeline, and whether the connecting hose is in good condition.

6) Check whether all tires have excessive or abnormal wear, whether the tire pressure is sufficient, and whether the valve seat is correct.

7) Check whether the steering rod joint is loose and whether it affects the straightness of the tire, and adjust the steering rod system if necessary.

8) Check the components of the power unit, clean the oil tank and valve parts, check the oil quality, and change the oil if necessary.

9) Check whether all parts of the suspension are in good condition.

10) Thoroughly clean the oil and dirt on all parts of the trailer, and check whether there is peeling or rust in each part.

 

48 Foot Flat Bed Semi Trailer for Sale in Mauritius

 

3. Maintenance of 2000 kilometers per line

1) Repeat the work of "maintenance every 1200 kilometers."

2) Clean the hub bearing, add new oil and adjust the bearing problem.

3) Rotate the tires.

4. Maintenance every 5000 kilometers

1) Repeat the "maintenance every 2000 kilometers".

2) Disassemble the hub, clean or replace damaged or worn various parts and hub bearings.

3) Replace the cylinder seals and damaged or worn parts.

4) The hydraulic pipeline is drained and cleaned. This work should be done at least once a year.

5) Clean the suspension shaft and its bearings, and replace with new grease.

6) Clean the brake tellurium and brake tellurium shaft, drop 1-2 drops of oil on the brake tellurium shaft, and check and adjust the brake clearance.

 

48 Foot Flat Bed Semi Trailer for Sale in Mauritius

 

5. Maintenance of the hoses in the air brake system and hydraulic piping system.

In addition to observing the contents of the inspection before driving, the following maintenance must also be carried out.

1) During the driving process of the brake hose and the high-pressure winding hose in the hydraulic system, especially when the cargo platform is lifted and turned, it is necessary to check whether the two hoses have friction and pressure with the trailer parts. The above inspection must be carried out after each trip, and the hoses must be rearranged and fixed immediately if found.

2) For brake hoses and hydraulic hoses, it is necessary to regularly check whether the rubber is aging, and replace it immediately once found.